E-Stim Product Reviews

I have been using these on myself and my wife for a week or so now, and they work very well indeed. We use them with or without e-stim, but when you hook them up to a control box, they take things to a new level of enjoyment. I'd love to see more colour options available. Thanks

I love these conductive rubber cord locks, they fit my 6mm CR perfectly, and I love the colour combination. Keep up the good work, I will probably have to get some more of these.

Low profile (90 degree) connectors are essential for use with toys that you intend to sit on, as sitting on ordinary (straight) connectors is uncomfortable and will quickly break the wires. Low profile connectors are hard to find, especially if you're looking for ones with insulation on everything except the pin itself (which is what we want for estim, to avoid unintended current paths).

If you're buying new cables then I'd probably recommend buying ones with built-in low profile connectors, but if you already have cables with straight connectors or if you want that type of cable for use with other electrodes then these adapters are ideal.

The only slight issue with them is that the strain relievers are very stiff. This means the wire can bend sharply where it exits the strain reliever rather than bending gently over the length of the strain reliever. Potentially this could reduce the life of the wire and this is the reason I've given four stars instead of five. That said, they're the only adapter of their kind that I've found for sale and they're better quality than anything most of us could make for ourselves, so I can still highly recommend them.

This is an absolutely must have for those who have the diamond plug electrode. Trust me, it's unpleasant when an electrified sound falls out. Joanne shipped the item very quickly and it was discreetly packaged. The hold up was the USPS! Within an hour of retrieving my mail, I had myself wired up with the diamond sound, the new holder, and Joanne's insulated ring. I tried a tri-phase setup for the first time and was blown away at how awesome it was. I ordered a size 1 and it was perfect for me. Thanks for such a wonderful creation.

I like these pad-style electrodes and find them very versatile. I find with square pads, the edges start to curl up and cause hot spots, but that doesn't happen with these.

Best I’ve used and always great service from Joanne. Ordered loads and always great :heart:️

So far so good. Provides nice coverage which evenly distributes the shock.

Absolutely brilliant peace of kite does everything it says on the box. Plus so many versions to suit individual desires wants and needs. If i could give it more stars i would.

Just what I needed, it holds the 2B securely, and I love the fact that I can put the battery in the strut, which makes it so easy to replace without having to trip everything down. Thanks for thinking outside of the box, Jo.

I've been looking for reliable cord locks for ages, but most are just a little too small and feel cheap if you know what I mean. I love that I can use 6mm or 4mm CR with these; they are perfect for the job at hand. I am going to get some of the larger-size ones, too, when they are back in stock. Thanks for creating something great.

Just the Ticket!

I just received the modified neck for my Flange. Cross-channel delivery was smooth and fast. The modified neck replaces the original one beautifully. In use, it is a great improvement, as the original straight neck tends to make the Flange 'slip out', not so with the modified neck, which gives it a better grip. I can truly recommend this to any Flange owner.

I have previously ordered other items from Joanne (all great fun ones!) and have been following her for some time now. My compliments for her inventiveness in creating and producing wonderful e-stim gadgets herself, for the humerous way in which she goes about her business, and meanwhile giving very useful information indeed about e-stim on various platforms for newbies and experienced stimmers alike. Cheers!

Another superb piece of equipment purchased from E-Stim Emporium. Dose everything it says on the box , delivering the right amount of pain or pleasure required every time . With the added bonus of brilliant customer service.

This is my new favourite piece of kit I use it with the tri phase cable, a sticky pad or the moaner and estim systems 2B on the waterfall setting and it is AMAZING hours of fun

TL; DR: If you like stimming on the glans then this is a must-have electrode.

This is a fantastic electrode with a design that's unlike anything else on the market, except for it's sibling design: the Jet Set Willy Electrode.

Whilst I have only used the Helmet Electrode, I imagine the Jet Set Willy feels very similar in use due to the defining feature of both their designs whereby a moulded stainless steel cap encases and stimulates the entire glans. Because the glans is very sensitive, especially on uncircumcised penises, using estim in this location can become overwhelming and uncomfortable. This is where these electrodes come into their own: used with a generous dollop of conductive lube they spread the stimulation out over the whole surface of the glans leading to a much more pleasant sensation than that experienced when using other electrodes which only make contact with a smaller surface area.

Being a monopolar electrode you need to pair it with another electrode elsewhere. Particularly good options include: a loop around the base of the penis or one around the balls; a sticky pad on the perineum; or an anal insertable, particularly if it can be positioned close to the prostate. But of course other possibilities exist too, so get experimenting!

Why did I choose the Helmet over the Jet Set Willy? There are three main differences between the two designs. The first is the Set of connectors available: the Helmet only has a small loop to which you attach a small crocodile clip (supplied with the electrode), whereas the Jet Set Willy also has connectors for 2mm TENS pins, 4mm banana plugs, and 3.5mm snap connectors. Secondly, the reason the Helmet is lacking the additional connectors is that it replaces them with a slot through which a non-slip elasticated strap (also supplied with the electrode) can be threaded. This holds the electrode in place and is a real benefit if either the corona of your glans isn't very pronounced or if you shrink and grow during a stimming session. Finally, the design of the cap differs: the Helmet contains a gap which allows those with either a Prince Albert piercing or a tighter or more sensitive frenulum to use the electrode, at the expense of a (very) small reduction in surface area.

When choosing your electrode (and you should choose one!) you'll want to consider the above differences to help you decide between the Helmet or the Jet Set Willy. It is also crucial to select the correct size in order to ensure that the electrode is large enough to fit but not so large as to leave gaps and thus lose contact with some of the glans. So I'd strongly recommend that you buy a sizing kit first to help you choose the correct size.

TL;DR: This is a very versatile device for anyone who enjoys estim and ball crushing, and it can give rise to a vast array of different sensations.

If you like having your balls squeezed, from a gentle squeeze to quite a severe crush, this product can add a whole new dimension to your play. It's a quad-pole electrode with one pole dedicated to each testicle (on the fixed "floor" of the cage) and two poles straddling both testicles (on the movable crusher plate).

Having four conductive surfaces in one device means there are a number of different ways to wire it up, and a vastly greater number if you pair up with other electrodes elsewhere on or in the body.

Using a single estim channel to pass current from one ball to the other can give a very pleasant tingling or buzzing sensation which really gets you going, and this can be enough on its own to give you an erection. If you're into pain play then ramping up the power will give you a more painful stinging sensation which becomes quite exquisite when coupled with a bit of a crushing.

Alternatively, if you can find the right settings on your power box, passing current from the single-ball electrodes on one side to the conductive surfaces that straddle both testicles on the other side can yield a sensation similar to having your balls sucked.

Other possibilities include using the crusher electrodes coupled with plugs, cock loops, or any number of other electrodes elsewhere; in this situation the device acts in a similar way to using sticky pads on your scrotum but with the added pleasure of pressure from the crusher.

I could ramble on and on about further ways to use this device, but if you're into ball crushing (or gentle squeezing) then you really should get yourself one and start experimenting :-)

Fantastic quality addition to the already amazing Moaner, you won’t regret it.

Excellent quality product with excellent customer service and fast delivery.

Well made quality product with fast efficient delivery.

Worked well and took the guessing out. Would suggest if you are in between sizes go down a size

This saddle is wonderful

this is amazing! very snug, great fit and conductivity, not stingy. craftsmanship an versatility is unmatched. lifes short, treat yourself to this excellent product! check it out on my X @estimelectro

Excellent clips, very strong and grip the conductive rubber really well.

Fast shipping across the pond !

Another well thought out bit of equipment by Joanne. Great that you can cut it down to whatever size you want.