I charge a nominal fee for the STL files and instructions for my more complicated designs, including this one.

I print mine in ABS, but you can use PLA/PETG instead if your prefer.

NOTE: You are purchasing a zip file containing three STL files and a PDF containing the instructions and suggested print settings for creating this electrode. You will need 25cm of 6mm conductive rubber and around 12cm of 4mm conductive rubber for the electrode surfaces. You will also need some acetone to glue the shield and collet together if you print it in ABS or some superglue if using another filament.

STL Files:

Shield.stl – The main part of this electrode.

Collet.stl – The small collet used to secure one end of the 6mm conductive rubber.

Pins.stl – The pins used to secure the free ends of the conductive rubber. You will need to print two of these.

I am not releasing the copyright to this design or the files purchased; you may not distribute them and can only make personal prints.

If you want one of them printed in ABS, you can get them here - Vaginal And Clitoral Bipolar Shield Electrode.