This pussy clamp bipolar electrode is a lot of fun. It takes 3.5mm snap connectors, and a pair are supplied so that you can simply use a regular 2mm pin plug estim cable.

The threads are made from nylon, and as such, they isolate each clamping face. Attach the two adaptor cables before fitting the electrode in place.

To fit securely it in place, unscrew the knurled nuts and then remove one of the black thread protectors before unscrewing its knurled nut completely so that you can open the clamping face to swing it out of the way.

Spread the labia open before inserting the centre section between the labia.

Once the centre section is nestled in place, then swing the clamping faces onto its thread and replace the knurled nut before tightening both nuts to the required level of clamping force. Finally, refit the black thread protective cap into place.

This clamping electrode measures 100mm x 50mm